Erbe VIO 3 - Modifications; From Version 1.1.X

9 / 84
2 • Modifications
80116-938_V24392  2023-03
CHAPTER 2
Modifications
From Version 1.1.x
Hardware
No changes
Software
Component affected Description of the modification
EIP 2 The Erbe irrigation pump EIP 2 can be connected to the VIO 3.
The EIP
2 parameters can only be set via the controls of the irri-
gation pump.
IES 2 The operating concept has been modified. The IES 2 parameters
can only be set via the controls of the smoke evacuator.
IES 3 The Erbe smoke evacuator IES 3 can be connected to the VIO 3.
The IES
3 parameters can only be set via the controls of the
smoke evacuator.
System settings 1 The “Smoke evacuator IES” setting only applies for V 1.0.x (see
changed operating concept from V 1.1.x).
Menu screen New function “System overview”: Display of information on VIO 3
and the connected system components (e.g. software version,
serial numbers).
New function “Display of the power curve”: Display of the power
values + duration of last activation.