DO NOT adjust tension without monitor attached.
1. Verify the weight of your monitor (including accessories) is between
4.4 - 26.4 lbs (2 - 12 kg).
2. Monitor weight information can be found within its box or manual.
3. Ensure monitor has been securely attached to the mount.
TENSION ADJUSTMENT SHOULD BE DONE ONLY
AFTER MONITOR INSTALLATION
Attention
WARNING:
• Gas Spring Arm is under pressure and should be handled with care.
• Failure to follow the instructions may result in damage to the mount
and / or personal injury.
03
To Next Page
Loading...
