Protection Mode Error Codes
HOT
rst
E11
E12
Overloading Protection: Max load exceeded. Error code
will persist for 20 seconds (DO NOT operate). Take the
things off the desk and follow the reset instructions.
Cable Disconnection Warning: Check motor and controller
cable connections. Normal operation should return once
all connectors are properly connected.
E14
The desk will move in the opposite direction and stop if
vibration, impact, or incline are detected.
Overheating Protection: When the motor has been working
continuously for too long, it will stop operating to prevent
overheating. Wait 18 minutes for the motor to cool down
before making any further height adjustment.
Reset Warning: Continue to complete reset.
19
To Next Page
Loading...
