Step 3
Attaching the Frame to the Desktop
Place the vertical support bar and middle crossbar on the desktop, and pay
attention to their positions. Also, make sure their screw holes are aligned
with large screw hole on the desktop.
Loosely thread the bolt through the middle crossbar and vertical support
bar, then into the desktop.
OR
Phillips
Screwdriver
(not included)
Drill
(not included)
You can use a drill (with
suitable torque and speed)
or a Phillips screwdriver.
OR
0808
0808
0909
0909
C1C1
0909
0808
0808
DD
0909
BB
09
To Next Page
Loading...
