E32
E31
E60
–
Overvoltage Protection: Input voltage too high. If the correct
AC adapter is being used, power off the desk, check the
connection between power and the controller, and power
on again.
Undervoltage Protection: Input voltage too low. If the correct
AC adapter is being used, power off the desk, check the
connection between power and the controller, and power
on again.
Unequal Leg Height Warning: Power off the desk and
check whether the left and right legs are at the same
height. Adjust if necessary by following the instructions.
Power on again.
Cable Disconnection Warning: Check motor and controller
cable connections. Normal operation should return once
all connectors are properly connected.
13
To Next Page
Loading...
