ergoline AFFINITY 660 DYNAMIC POWER Installation Instructions

Montage Assembly
63
– Plug in the IR interface into the foot of sun-
bed as shown in the illustration.
– Reconnect the plug at the foot of the sun-
bed.
– Die Rändelschrauben, mit denen die Front-
blende gehalten wird, wieder befestigen.
– Retighten the 2 knurled thumb-screws that
hold the front panel in place.
– Halteblech festschrauben.
– Retighten the screw in the support.
Note:
The IR interface will only work if the
plug has been fitted correctly.
2 3 4

ergoline AFFINITY 660 DYNAMIC POWER Specifications

General

Brand	ergoline
Model	AFFINITY 660 DYNAMIC POWER
Category	Tanning equipment
Language	English