Montage
Assembly
66
– Place cardboard or similar beneath the fi-
xing to catch the screws and prevent them
falling between the lamps.
– Fasten the screws.
– Setzen Sie die Abdeckkappen ein.
Die Abdeckkappen liegen bei Auslieferung
des Geräts lose bei.
– Place the covering caps in position.
On delivery the covering caps are provided
loosely.
– Setzen Sie die Lampenabdeckungen wie-
der ein.
– Replace lamp covers.
Caution!
Use the screws which you took out du-
ring dismantling. Only screws suitable
for use with plastic should be used.
Other screws will damage the thread.
3 4 5
...
To Next Page
Loading...
Need help?
General
