Ergotron WorkFit-D - Workstation Assembly: Final Positioning; Step 10: Uprighting the Desk; Step 11: Leveling the Work Surface

8 of 12
888-24-205-G-01 rev. C • 09/12
10
Set the desk upright onto its legs.
CAUTION!
LIFT HAZARD! Two persons
are required for this step.
Failure to follow this
warning may result in
equipment damage and or
personal injury.
Set-up Steps
11
Adjust the riser on each leg and check with a level to
make sure the work surface is even.
Spin Right to Lower.
Spin Left to Raise.