Ergotron Zip40 User Manual

9 of 17
e
h
d
g
11
ENGLISH
888-24-326-G-02 rev. E • 08/18
d. Plug in the power cables for the Middle shelf. Use the entire third outlet row, and for the 40 device
confi guration, the remaining outlets on the second row. Store the power cables from the second
outlet row in the top basket and the power cables from the third row in the bottom basket.
e. Route the device plugs under the third outlet row and up through the top of the dividers. Make
sure there is enough slack in cable to plug into device.
f. Bundle cables and store in the baskets.
g. Plug in the power cables for the bottom shelf. Use the bottom row of outlets. Store the power
cables in the bottom basket.
h. Route the device plugs between the basket and the bottom outlet row and up through the top of
the dividers. Make sure there is enough slack in cable to plug into device.
i. Bundle cables and store in bottom basket.

Ergotron Zip40 Specifications

General

Brand	Ergotron
Model	Zip40
Category	Controller
Language	English