GUIDE ON ASSEMBLY OF THE ERICA SYNTHS DIY SYNTH VOICE
When developing Erica Black Series and Pico Series modules, we accumulated quite a know-how on compact and great sounding designs, and
we decided to share some of those with DIY community. And therefore Erica Synths proudly presents – DIY Synth Voice module! It consists of all
essential blocks for versatile monosynth, and is 100% patchable for even more control options. In order to make the module more compact and
reliable in tuning, it has digital/analogue design. VCO and envelope generators/LFOs are digital, other parts are analogue. Digital parts are designed
arround pre-programmed STM controller, which comes with a kit presoldered on a small contoller board. Chain up several Erica Synths
DIY Synth Voice modules and you have a versatile polysynth!
FEATURES
VCO with 16 waves and manual wave morphing
-1 oct suboscillator
White noise generator
External audio input
Audio Mixer
LP/BP VCF inspired by Black Polivoks VCF
Lin/log ASR envelope generator with looping function
Lin ASR EG/LFO with looping function
9 LFO waves with wave morphing
Tap tempo and LFO sync
LFO frequency multiplication (x2, x4) and division (/2, /4) in sync mode
VCA with bias control
Auto callibration for better 1V/oct tuning
TECHNICAL SPECS
VCO range: ..............................................................................................C1 – C8
Audio output level: ...................................................................................10V ptp
LFO output level: .................................................................................. -5V - +5V
EG output level: ........................................................................................ 0-+10V
EG1 attack time ....................................................................................0-500ms
EG1 release time .......................................................................................... 0-2”
EG2 attack time ....................................................................................0-500ms
EG2 release time .......................................................................................... 0-1”
LFO frequency: ................................................................................ 0,1Hz - 70Hz
VCA attenuation level: ..................................................................................80dB
Panel width: ................................................................................................ 30HP
Module depth: ............................................................................................35mm
Power consumption: ................................................. 82mA@+12V, 50mA@-12V
To Next Page
Need help?
General
