THANK YOU FOR PURCHASING THIS
ERICA SYNTHS BLACK SERIES
MODULE! These are high-end modules
with unique functionality. Only the
highest quality components are used
and all inputs and outputs are
protected against undesired
overvoltage. When designing the Black
Series, we did not economise on the
module width, we put design and
usability first. Big knobs are assigned to
functions that make dierence in sound.
The Erica Black series are a range of
modules that together make an entire
synthesizer. Enjoy!
THE Erica Black Output Module is a
high quality output mixer and stereo
panner with balanced outputs and
headphone amplifier for monitoring
your modular masterpieces. All inputs
are buered, we use stereo
potentiometers (found in high quality
studio mixers) for panning, IN3 has a
CV controlled autopan function. You will
find 6.3mm jacks for balanced outputs
and headphones.
SPECS:
Input level………………….............-10V - +10V
Pan CV input level……......………-10V - +10V
Phone amp out power ..................100mW
Power consumption…..... +65mA, -45mA
Module width………...............……………14HP
Module depth……….........……………..30mm
BLACK OUTPUT MODULE
These knobs are for manual
stereo panning for INPUT1
and INPUT2
These knobs adjust input
signal level
Patch audio signals form
three dierent sources
here!
Apply INPUT3 panning
CV here!
INPUT3 has CV controlled
autopan option, and this
knobs attenuates panning
CV level
Adjust master output
level
Adjust phones volume
independently from
master level
Plug monitor
headphones with
6.3mm jack here!
These are balanced
outputs for Left and
Right stereo channels