Not
f
or Comm
e
r
c
ia
l
Use
E
ricsson Mobile
Com
m
unic
a
t
i
ons A
B
50 Personalizing the base station
To set least cost routing:
Route:
BaseStation » Routing
1. Select
Routing
and press YES.
PIN:
is displayed.
2. Enter the PIN code for the base station (see page 58) and press
YES.
Either
Route
(1 - 4) or a number, if a prefix has already been set, is
displayed.
3. Press the
UP or DOWN key, once or more, to choose a different prefix if
required and press
YES.
4. Enter the prefix digits (
CLR = delete; UP = move left; DOWN = move
right).
5. Press
YES to confirm.
Substitution digits are displayed if they have been set before.
6. Enter the substitution digits (
CLR = delete; UP = move left; DOWN =
move right).
7. Press
YES to confirm.
A prefix with associated substitution digits is set.
If you include a pause in a telephone number, there is a pause during dialling
at that point to wait for the dial tone. The base station automatically inserts a
dial tone pause before each telephone number. You can adjust the length of the
pause.
The standard pause is 1 second. You can set this from 1 to 10 seconds:
Route:
BaseStation » Basic » PhoneLine » Pause
1. Select
Basic
and press YES.
PIN:
is displayed.
2. Enter the PIN code for the base station (see page 58) and press
YES.
3. Select
Pause
and press YES.
The current pause length is displayed.
4. Enter a number (1 - 10) to set the length of the pause in seconds.
5. Press
YES to confirm.
The dial tone pause has now been changed.
To include a pause in a telephone number, press
for one second. A dash
marks the pause. The base station waits for the dial tone for the length of the
dial tone pause.
DIAL TONE PAUSE
To Next Page
Loading...