5) In the ‘Server’ tab select ‘PPP: Windows NT,
Windows 95 Plus, Internet’ from the ‘Dial-up
server type’ list. Be sure that ‘TCP/IP’ is the only
ticked protocol within the ‘Network protocols’
box.
6) Push the ‘TCP/IP Settings…’ button.
– ‘Server assigned IP address’ must be checked.
– ‘Server assigned name server addresses’ must
be set if network operator requires it. If the
network operator provides DNS addresses, then
these must be added once ‘Specify name server
addresses’ is marked. (Example shown in figure
below with primary and secondary DNS
addresses provided by operator being
111.111.111.111 and 222.222.222.222)
46 Annex: PC data configurations
To Next Page
Loading...