Installation
12 Fixed Wireless Terminal: G32 and G36 models
3. Open your Web Browser on your PC, and type in the following URL:
http://192.168.1.1/pin.asp
4. The following screen will be displayed.
5. Type in your PIN and then click on the Submit button.
If the PIN is entered incorrectly three times, the SIM card will be blocked.
If this happens, you can unblock it by using the PUK (Personal Unblocking
Key), which you also may get from your network operator. Please refer to
the topic SIM Card Security documented on page 4 for more detailed
information.
Note: Once you have entered the PIN code for the first time, you
will not have to enter it again unless you change your SIM card.
The FWT performs this operation automatically in case of power
failure.
Network Search
After you have switched on your FWT and entered the PIN, the FWT
automatically searches for a network.
When a network is found, the Radio LED is on or flashes depending on
the GSM signal strength.
Note: If the Radio LED is off, you do not have access to the GSM
network at your present location.
Now you have prepared the FWT for wall installation. Please, follow the
instructions on the next page for complete wall installation.
To Next Page
Loading...