Installation
Fixed Wireless Terminal: G32 and G36 models 13
Installing the FWT on the Wall
FWT Location
The GSM signal strength available at the FWT location affects the
performance of the unit. The stronger the GSM signal, the better the FWT
performance.
Tip: Test several potential locations by moving the FWT while
looking at the Radio LED. Select the location where the Radio LED
is continuous, or the location with the highest amount of flashes.
Note: Moving the FWT as little as 20 cm can affect the GSM
reception quality.
Location Testing
Number of Radio LED flashes Location status
0 OFF Unacceptable
1 - - - Acceptable
2 - - - - - - Good
3 - - - - - - - - - Very Good
Continuously ………………… Excellent
Please consider the following recommendations:
• Always select an indoor
indoor indoor
indoor location, preferably close to a window
and as high as possible in the building. Generally, you will
experience better GSM signal strength in these places.
• Do not install the FWT in a wet or damp location.
• Do not install the FWT in an outdoor location.
• Do not install the FWT on walls or in rooms that contain large
amounts of metal, steel or wiring.
• Do not expose the FWT to extreme temperatures (near
radiators, cooling vents, etc).
If you experience poor reception quality, an outdoor antenna may improve
reception. Please refer to the topic Accessories documented on page 4
for more detailed information.
Warning: When choosing the final location for the FWT, ensure
that there is at least 20cm between the FWT antenna and all
persons.
To Next Page
Loading...
