Advanced Features
26 Fixed Wireless Terminal: G32 and G36 models
To manage restriction of
calls …
With Function … Dial … You will hear…
Deactivate #332*Password# 3 beeps
calls except your home
country
Check status *#332#
1 beep if activated
3 beeps if deactivated
Activate *35*Password# 1 beep
Deactivate #35*Password# 3 beeps
All incoming calls
Check status *#35#
1 beep if activated
3 beeps if deactivated
Activate *351*Password# 1 beep
Deactivate #351*Password# 3 beeps
All incoming calls when
you are abroad
Check status *#351#
1 beep if activated
3 beeps if deactivated
All Deactivate #330*Password# 3 beeps
Note: If instead of hearing beeps you hear a deep tone, this means
that there has been an error in the activation or deactivation.
Multiparty Calls
You can handle more than one call simultaneously. For example, you can
put an ongoing call on hold, while you make or answer a second call, and
then switch between the two calls.
You can also set up a conference call to have a joint conversation with up
to four people.
Call waiting service
If you wish to be able to receive a second call while another call is in
progress, you must turn on the call waiting service.
Note: If you are engaged in a fax or a data call, any other incoming
calls are rejected.
Note: These dialing sequences may vary depending on your
network operator. If these do not work, please consult your
network operator or check the user guide provided with your
subscription.
To manage Call waiting Function… Dial… You will hear…
Activate *43# 1 beep
Deactivate #43# 3 beeps
To Next Page
Loading...