Advanced Features
28 Fixed Wireless Terminal: G32 and G36 models
• To join the two calls into a conference call: press R3
R3R3
R3. Now you
have a conference group of three participants (participant 1,
participant 2 and yourself).
To add a new participant (participant 3)
• Put the conference group on hold (press R
RR
R) and dial to
participant 3.
• Join the new participant to the conference group: press R3
R3R3
R3.
Now you have a conference group of four participants
(participant 1, participant 2, participant 3 and yourself).
To end the conference call, hang up the telephone. To release a specific
call from the conference group: press R1X
R1X R1X
R1X (where X is the number of
order of the call).
To choose one call from the multiparty in order to have a private
communication, putting the rest of the conference calls on hold: press
R2X
R2X R2X
R2X (where X is the number of order of the call you want to communicate
with).
Explicit Call Transfer
To transfer a call to another destination number (B-number).
• Put the ongoing call on hold (press R
RR
R) and dial the B-number.
• Now you can connect this new call, which is ongoing, with the
call you have put on hold, but abandon the conversation
yourself. To do this, press R4
R4R4
R4.
Phonebook / Abbreviated Dialing
You can store telephone numbers in either the SIM card memory or the
FWT memory. Up to 99 telephone numbers can be stored in each of
them.
The following table shows how to manage the phonebook with the 99
memory positions (Pos).
Warning: The position must always consist of two digits. For
example, memory position number 1 has Pos=01
To manage the
phonebook in …
With
Function …
Dial … You will hear…
Store **51*Pos*Phone number# 1 beep
Delete #51*Pos# 3 beeps
SIM card
memory
Check
position
*#51*Pos*Phone number#
1 beep if stored
3 beeps if not stored
To Next Page
Loading...