The Menus
The menus are arranged in a continuous loop. The right and left
arrows allow you to access the menu system and then scroll from
menu to menu.
When you reach the desired menu, press YES to select it.
Most of the menus have a number of functions. Scroll with the right
and left arrows until you reach the desired function. Press YES to
select it.
Similarly a function has a number of different settings that you can
reach by using the right and left arrows. Press YES to confirm the
setting you have chosen.
The NO key allows you to leave a setting unchanged. It can also be
used to move back from a function to a menu and from the menu
to the standby display.
Use the CLR key to take you back to the standby display.
Note! You will leave the menu system automatically if you do not
press any key within 60 seconds or if you receive a call.
Display Texts and Symbols
UPPER-CASE letters are used to indicate the menu or function
selected. When ~and R are displayed you can scroll with the right
and left arrows.Text within brackets indicates the current setting for
the displayed function.
How to Enter Letters
With some functions you can enter letters and other characters
using the numeric keys.
Press the appropriate key, 1-9, 0 or # repeatedly until the desired
letter, character or digit appears in the display. For example, to enter
an A, press the numeric key 2 once. To enter a B, press the numeric
2 key twice.
12 EN/LZT 126 1353 R1B
You have selected the
CLOCK
menu
You can scroll
through the
FUNCTIONS
T
he current SETTING for
t
he displayed function
CLOCK
~Set clockR
(16:44)
To Next Page
Loading...
