Handling More than One Call
The phone allows you to handle more than one call simultaneously.
This means that you may hold a call in progress and make or answer
a second call and then switch between the two calls.
How to Activate the Call Waiting Service
To be able to receive a second call, you must activate the Call
Waiting service.
1. Select Call Waiting from the
ACCESS menu.
2. Press YES to activate.
There may be a short delay before the network responds. In the
meantime, the message Please wait is displayed. This is followed by
the message Call waiting ON.
How to Cancel Call Waiting
1. Select Call Waiting from the
ACCESS menu.
2. Scroll to Cancel.
3. Press YES to cancel Call Waiting.
The Get status option lets you check whether the service is
activated or not.
How to Make a Second Call – Alt. 1
1. Clear the display by pressing CLR while the first call is in
progress.
2. Press YES to put the current call on hold. The message 1 on hold
is displayed.
2. Enter the number you wish to call, or recall it from the phone
book, and press YES.
How to Make a Second Call – Alt. 2
1. Enter the number you wish to call while the first call is in
progress.
2. Press YES to make the call. The message 1 on hold is displayed.
Receiving a Second Call
You will hear a tone in the ear piece and the message Call wait
appears in the display if the Call Waiting function is activated.
How to End Current Call and Accept Waiting Call
1. Press NO to end the current call.
The question Answer? appears.
2. Press YES to answer the waiting call.
How to Put Current Call on Hold
1. Press YES to put the current call on hold.
The message 1 on hold appears.
How to Reject Waiting Call
•
Press ‘0’ followed by YES to reject the waiting call and continue
the current call.
38 EN/LZT 126 1353 R1B
To Next Page
Loading...
