The Two Line Service
Two voice lines with different phone numbers, Line1 and Line2,
may be assigned to your phone. The ability to receive and send text
messages (SMS), is only available on Line1. The Two Line service
may not be available on all networks and may require a separate
subscription.
How to Select a Line
1. Select the menu that allows you to alternate between Line1 and
Line2.
2. Press YES.
Note! Instead of accessing the menu system, you can press and
hold down the 1 or 2 key to change line, provided the phone is in
standby mode. Clear the display first by using the CLR key.
The selected line is indicated as L1 or L2 to the left at the bottom of
the display.
From now on, all outgoing calls are made on the selected line. You
can however, be called on both lines.
How to Answer a Call on Line1 or Line2
When someone is calling you, the question Answer? is replaced by
Line1 or Line2 depending on which line the call is received.
•
If you are engaged in a call on one line, you must end this call
first before answering the call on the other line.
Different Settings for Each Line
You can have different settings for each line, for example the tone
of the ring signal, call diverts, call bars and waiting function.
The call meters in the
INFO menu show the call times (call costs) for
the line currently selected.
How to Change the Name of the Two Lines
In the
SETTINGS menu there is a function, Line 1 or Line 2,
depending on the line currently selected, that lets you give each line
a new name. Twelve characters can be entered at the most.
EN/LZT 126 1353 R1B 47
MENU
~Change to
Line1
MENU
~Change to
Line2
4 A NET 7
28
L2 09:09
To Next Page
Loading...
