Ericsson LPE-200 - Receive Specifications; Transmit Specifications

AE/LZB 119 1902 R1A
5
SPECIFICATIONS
∗∗
(Con't)
RECEIVE
Channel Spacing 12.5 kHz
Sensitivity (12 dB SINAD) -118dBm
Selectivity: -63 dB
Intermodulation -67 dB
Frequency Separation Full Bandwidth
Audio Output 500 mW @ 3% Maximum Distortion
TRANSMIT
RF Power Output 0.5 - 3 Watts (Normal Trunked)
Spurious and Harmonics -55 dBc
Modulation/Deviation
±
2.5 kHz
Frequency Separation Full Bandwidth
FM Hum & Noise -35 dB
(Companion Receiver)
Audio Distortion Less than 3% @ 1000 Hz, 3 kHz deviation
Frequency Stability
±
1.5 PPM
(-30
°
C to +60
°
C: + 25 Ref)
Audio Frequency Response EIA
∗
These specifications are intended primarily for the use of the service technician. See the appropriate Specification Sheet for
the complete specifications.