AE/LZB 119 1902 R1A
9
KEYPAD SCAN/SYSTEM FUNCTIONS
Figure 2 - Scan Keypad
Figure 3 - System Keypad
Key Function
▲
▼
Primary Function: Allows user to select
either system, groups, or channels, depending
on personality programming. The buttons act
as
STEP UP
or
STEP
DOWN
. Pressing one
of these buttons displays the next or previous
stored system, group or channel.
Secondary Function: Changes the selection
for an item within a list.
M
Primary Function: Accesses the pre-stored
menu. The menu can include high/low power
setting, keypad lock, LCD contrast, LCD and
keypad back lighting.
Secondary Function: Activates a selected
item within a list. After a menu list is
accessed, scroll through the list using the
,
keys and then activate specific
items with the
M
key. This is similar to an
“Enter” key.
Key Function
A/D
(Scan
only)
Adds/Deletes selected groups or channels
from the Scan list of the currently selected
system.
SCN
(Scan
only)
Turns the Scan operation On and Off.
OPT
(Scan
only)
Activates one of a number of programmable
software options, selected during the PC
programming. Programmable options
include high/low transmitter power and talk-
around.
1
(System
only)
Used to select a specific system. If the rotary
knob is used to select the system and more
than 16 systems are programmed in the radio,
the
1
key is used to select additional
banks (groupings) of systems.
1-9, *,
0, #
(System
only)
These keys are used to place telephone
interconnect and individual (unit-to-unit)
calls. The keys operate like a normal
telephone keypad.
2
(System
only)
Used to select a specific group.
3
(System
only)
Used to turn the SCAN operation on and off.
*
(System
only)
Used to place telephone interconnect calls.
#
(System
only)
Used to initiate individual calls.
6
(System
only)
Adds groups or channels from the Scan list of
the currently selected system.
9
(System
only)
Deletes selected groups or channels from
Scan list of the currently selected system.
To Next Page
Loading...