Ericsson RBS 2308 - Tools and Instruments; Tools for Installation of RBS 2308 and RBS 2309

RBS 2308 and RBS 2309 User’s Guide
4 Tools and Instruments
This section contains lists of all tools and instruments recommended for the
complete installation of the RBS 2308 and RBS 2309.
4.1 Tools for Installation of RBS 2308 and RBS 2309
Table 2 Basic Tools for Installation
Description
Specificatio n
Adjustable spanner 10"
–
Drilling machine
–
Knife
(1)
–
Measuring tape
(1)
6m
Pen
–
Screwdrivers
(1)
Torx: T 20 and T30
Screwdrivers
3 mm and 5.5 mm
Side cutting pliers
(1)
–
Snip nose plie rs
–
Socket set
(1)
10–19mm
Spirit level
(1)
–
Torquewrench 5–25Nm
U wrenches
(1)
13 mm, 16 mm, 17 mm, 20 mm and 22 mm
Wire stripper
(1)
0.2–6mm
2
(1) Included in Personal Tool Set, Product Number LTT 601 135/1.
Table 3 Special Tools for Installation
Description
Specification
Product Number
Crimping tool set for grounding
LTT 601 86
Torque wrench
for N connector LSS 103 25/1
Torque wrench
for TNC connector
LTT 601 93
U-key, 32 mm
(1)
for 7/16 con nector LSB 107 12/5
(1) Requires torque set 20–100 Nm, product number LTT 601 141/1.
4.1.1 Documentation
The following documents are required for the installation procedure:
3
5
EN
/LZT 720 0027 Uen R8 A 2 006-06-27