Ericsson RBS 2308 - Equipment for Site Installation Tests; Equipment for PSTU Startup

RBS 2308 and RBS 2309 User’s Guide
4.3 Equipment for Site Installation Tests
Table 5 Test Equipment for Site Installation Tests
Description
Specificatio n
Product Number
Fluke79III Multimeter
LPK 102 024/3
Torx T20
(1)
Torx screwdriver
–
(1) Included in Personal Tool Set, product number LTT 6 01 135/1.
There are different versions of the OMT depending on the BTS software
installed in the RBS. See table below.
Table 6 OMT Kits
Product
Name
Description Product No.
BSS SW
Compatibility
NTM 201 2289/3 Up to BSS R9.1
NTM 201 2289/4 Up to BSS R10
NTM 201 2289/5 Up to BSS R11
OMT Kit • Cable
• CD comprising OMT
SW and manual
NTM 201 2289/6 Up to BSS R12 and
BSS 06A
(1)
(1) BSS 06A is the successor to BSS R12
4.3.1 Documentation
The following documents are required for the site installation tests:
• A completed test record from antenna system tests
• A test record for site installation tests
OMT User’s Manual (included in
OMT Kit )
EN/LZN 720 0001
4.4 Equipment for PSTU Startup
Table 7 Basic Tools for PSTU Startup
Description
Specification
PC equipped with a VT100 terminal
emulator program and a standard
RS-232 serial port
–
Standard RS-232 serial cable. (The
standard OMT cable included in the
OMT kit can also be used.)
–
3
7
EN
/LZT 720 0027 Uen R8 A 2 006-06-27