Ericsson RBS 2308 - Page 66

RBS 2308 and RBS 2309 User’s Guide
4.
Connect the Y link cable to the
applicable connection port on
the IXU, see Table below.
P010155B
Y link Y link Y link
1-4 5-8 9-12
Y link Y link Y link
1-4 5-8 9-12
Note: Blanking plugs must be inserted in the unused cable inlets.
Table 15 Y link Connection Port
RBS Connection Port
RRU 1 Y link 1 – 4
RRU 2 Y link 5 – 8
RRU 3 Y link 9 – 12
Connectin
g the RBS 2302 to a New Master Cabinet in a Mixed Micro
Configura
tion
This secti
on describes how to connect RBS 2302 cabinet cables (TXL and
PCM) to th
e new master cabinet (RBS 2308 or RBS 2309) in a m ixed micro
configur
ation. See also Section 5.5 Installing Mixed Micro Configurations on
page 85.
58
EN/LZT 720 0027 Uen R8A 2006-06-27