RBS 2308 and RBS 2309 User’s Guide
Connecting Extern
al Cables
This section descr
ibes how to connect different external equipment, for example
MINI LINK™ or trans
mission, see Figure below.
Note: To simplify
the cable connections, the connection frame on the IXU
can be removed.
EXT.ALARM 1-4
-48V
LINK
PORT A PORT C PORT B PORT D
P010211A
Figure 22 Connection Ports on the IXU
1.
Remove the connection frame
from the IXU.
P010126A
2. Remove the c able gland parts
and remove the sealing insert.
Route the cable through the
cable gland parts and strip the
cable insulation. Cut the cable
screen according to the figure.
P010463B
10 mm
60 EN/LZT 720 0027 Uen R8A 2006-06-27
To Next Page
Loading...