Procedure
Figure 5 Cabinet Lifting
7. Remove the lifting straps and eyebolts.
8. Insert four washers and M16 locking bolts and tighten them to the
appropriate torque (depending on the material to which the cabinet is
attached), using a torque wrench and a 24 mm Open-ended head.
9. Attach the roof by pushing it straight backwards. Screw in the five bolts
and tighten them to a torque of 8 Nm, using a 6 mm hexagon bit and a
torque wrench.
9
1/1531-COH 109 2073 Uen H 2006-11-06
To Next Page
Loading...
