Prerequisites
2.2 Tools
The tools required for the installation of the RBS 3107 are shown in the table
below.
Table 1 Tools Required
Product Name Description Product Number
Personal tool set Personal tools LTT 601 135/1
Open-ended wrench
(u-wrench)
(1)
set
LTT 601 139/1
T8 Torx screwdriver LSA 901 43/6
T15 Torx screwdriver LSA 901 43/2
T30 Torx screwdriver LSA 901 43/5
Screwdriver for bits LSS 103 28/1
Side cutters (side cutting
pliers)
(1)
LSD 901 43/1
Cable cutters LDK 901 15/1
Cable shield cutters LDK 901 18/1
Wire stripper 0.2 – 0.6 mm LSD 901 45/1
Spirit level LMV 901 04/1
Ear protectors LYB 921 50/1
Tools included in the
personal tool set, needed
for the installation
Eye protectors LYB 921 51/1
230 V AC LTT 601 146/1Hammer drill
or
Cordless hammer drill
(2)
Cordless 230 V AC LTT 601 147/1
Box socket set with ratchet
wrench
LTT 601 138/1
Torque wrench, 0 – 10 Nm
with T30 torx bit
LTT 601 148/1
Torque set, 20 – 100 Nm LTT 601 141/1
Torque set, 5 – 25 Nm
with 3/8 in. socket adapter
LTT 601 140/1
Open-ended head (u-key),
24 mm
(1)
LSB 107 12/3
Open-ended head (u-key),
27 mm
(1)
LSB 107 12/4
Open-ended head (u-key),
32 mm
(1)
LSB 107 12/5
Other tools needed
Eyebolts, M12 SAR 201 120/03
(1) Ericsson name within parentheses.
(2) Hammer drills for voltages other than 230 V AC cannot be ordered from Ericsson.
31/1531-COH 109 2073 Uen H 2006-11-06
To Next Page
Loading...
