Install RBS
Ge7012A
Hang the mounting bracket on the two upper screws.
Ge7013A
1
3
2
Attach the third screw and tighten all the screws using a screwdriver.
Ge7446A
Prepare the cables so that they are at the correct length (as indicated
on the drilling template).
Ge7447A
Route all cables through the cable holders on the left-hand side of
the RBS. Secure the cables with cable ties as indicated in the figure.
Note
8
56/1531-LZA 701 6001 Uen D | 2015-11-06
To Next Page
Loading...
