Install RBS
Ge7234B
The RBS can be installed horizontally on ceilings, see Appendix A
for more information.
The RBS can optionally be installed with the external antenna
adapter, see Appendix C for more information.
5. Attach RBS to Bracket and Connect Cables
Ge7014B
Hang the RBS on the mounting bracket hooks.
Ge7448A
click
click
Press down gently so that the RBS locks onto the hooks.
Ge7015A
Connect the cables.
Note that there are two options for powering the RBS and they
determine the order of the cabling, as follows:
• Power over Ethernet (PoE), with a PoE Ethernet Switch or a PoE
Injector to the RJ-45 connector
• AC/DC power converter (48 V DC to the DC input connector)
9
56/1531-LZA 701 6001 Uen D | 2015-11-06
To Next Page
Loading...
