Install RBS
Ge7102A
WAN A / PoE WAN B48 V
When using PoE with a PoE Ethernet Switch or a PoE Injector to the
RJ-45 connector, connect the cables in the following order:
Connect the external antenna cables on the back
of the RBS; see step 11 and step 12 in Appendix
C for more information.
Connect the GPS Receiver Unit (GRU) cable to
the GRU port with the Mini I/O connector. The
RBS uses an external GRU module.
Connect the optical cable to the WAN B port.
Connect the RJ-45 cable to the WAN A / PoE
port. Only connect the RJ-45 cable when all other
cables have been connected.
When using an AC/DC power converter, connect the cables in the
following order:
Connect the RJ-45 cable.
10
56/1531-LZA 701 6001 Uen D | 2015-11-06
To Next Page
Loading...
