erlab Captair Flex S Series - Erlab Safety Program (E.S.P.)

User Manual
TM
28
erlab
®
safety program
THE
®
PROGRAM—KEEPING YOU SAFE
CERTIFIED INSTALLATION
MANIPULATION IN TOTAL
SAFETY
PERMANENT
FOLLOW-UP
UNIT RECONFIGURATION
ACCORDING TO
THE PROTECTION NEEDS
PREVENTIVE
CONTROL AND
MAINTENANCE
DETERMINATION OF
ERGONOMIC NEEDS
RISK ASSESSMENT
DETERMINATION OF
PROTECTION NEEDS
Call your ESP
®
specialist today
and configure this unique Captair
®
Flex™
solution to your requirements.
www.erlab.com
1
2
3
The service:
Certify and secure the usage
framework at installation
When you receive your Captair
®
filtering fume hood, a
usage certificate will give precise details on the chemicals
to be used, the filter type and an estimation of its lifetime
expectancy, for which your Captair
®
filtering fume hood has
been validated. This certificate is a permanent reminder to
the user or the safety officer of the data relating to their
protection.
The
service:
A constant monitoring of your filtering fume hood.
Periodically (about every six months), the E.S.P.
®
agent will
contact you to make sure that you have not changed your
handlings and that the filter is still active. The E.S.P.
®
agent
will show you how to perform step by step filter saturation
tests and also the procedure for filter replacement. During
this contact, if the E.S.P.
®
agent finds that there is a change
in chemical handlings, you will be asked to complete a new
questionnaire (see step 1). After review, a new certificate
for use (to be placed on the front of the filtering fume hood)
naming the approved chemicals will be sent to you to ensure
that your chemical handlings are still performed within
optimum safety conditions.
The
service:
Determine the most appropriate filtering fume
hood for total safety during your handlings
Assisted by an E.S.P.
®
agent, you complete the investigation
questionnaire, which precisely describes your intended
chemical handlings. Our validation laboratory specialists
will recommend the appropriate filtration fume hood and
filter type. Personalized advice and accurate answer within
48 hours. A certificate validating the handling is supplied:
real commitment of the manufacturer to the safety of the
operator.
A long-lasting commitment by erlab
®
to the safety of the operator
An essential part of user safety, our laboratory’s mission is to assess the interactive behavior of
®
specialist will recommend the most appropriate unit,
user. After installation, your E.S.P.
®
specialist will provide you with a constant monitoring of the unit
regarding the handlings performed.