erlab Captair Flex S Series - Revolving Filter System

User Manual
TM
50
New filter
Main filter
Back-up filter
This simple concept involves placing one chamber equipped with a molecular detection
system between two filters having the same capacity. When the main filter is saturated,
the molecules are directed to an identical back-up filter that is placed just above the
detection chamber.
This system prevents all molecules from being released into the environment since they
are automatically absorbed by the back-up filter. The back-up filter replaces the main
filter when the main filter has reached its maximum saturation point. A new filter is then
installed in place of the back-up filter. This cycle may be repeated indefinitely.
Compared to traditional filtration systems, the “revolving filter” concept increases the
retention capacity of the filter by 25% and decreases replacement costs by 25%.
The “revolving system” may be used with following Flex™ technology types:
2C 2C 1 P1P 2C
Energy recycling system
THE «REVOLVING» SYSTEM