User Manual
3
Your new Captair
®
Flex™ ductless filtering fume hood
offers several advantages from day one:
Benefit from the use of an immediately
available unit, easy to relocate.
Captair
®
Flex™ filtered enclosures can be moved depending
on the protection needs of the laboratory and can be easily
relocated without disturbing room air balance.
Eliminate installation costs
The installation of a captair
®
Flex™ filtered enclosure is
quick and easy. There is no need for a ductwork linked
to an air supply / air extraction system, in comparison to
traditional ducted systems. A single electrical outlet is all
that is needed to make it work Its setting up can be realized
at any time, without any complex forward planning. Do not
hesitate to compare this cost to a traditional ducted fume
hood cost.
Protect the environment
Since no ductwork is required, a captair
®
Flex™ filtered
enclosure totally eliminates the direct discharge of
pollutants into the atmosphere and therefore contributes
to the protection of the environment. Furthermore, a
captair
®
Flex™ filtered enclosure does not generate any
pollution linked to energy production unlike a traditional
ducted fume hood.
Achieve significant energy savings
Ductwork air balance is essential to the proper operation of
a traditional ducted fume hood however; it is also the source
of very important energy consumption. In fact, captair
®
Flex™ filtered enclosures do not generate any energy costs
associated with the use of expensive extraction systems
or conditioned air supplies. Operational costs remain at a
minimum even when taking into account filter changes.
To Next Page
Loading...
