To Next PageTo Next Page
Need help?Do you have a question about the ermaf RGA 100 ACU and is the answer not in the manual?
Instructions for safe installation and operation. Keep manual safe.
Explanation of symbols, danger, warning, and caution indicators.
Verify heater suitability for application and specified limits.
Critical safety advice for installation, clearances, and fire risk.
CE approval, max length, and chimney elements for RGA 100.
Importance of siphon for flue gas and condensate management.
Procedure for connecting gas pipes and changing gas type.
Step-by-step guide for performing gas tightness tests.
Safety precautions for electrical connections and isolation.
Diagram illustrating various internal connections and components.
Methods for connecting a single heater to a room thermostat.
Connecting multiple heaters to a central thermostat or computer.
Description of multi-functional outputs (MFA).
Connecting and parameterizing an external fan.
Selecting and adjusting the burner's capacity range.
Information on the BCC's function and data saving.
Adjusting the switch-on delay potentiometer for multiple heaters.
Ensuring correct installation and BCC compatibility before commissioning.
Overview of heater operating modes and control buttons.
Understanding error codes and flame signals on the display.
Procedure for activating and deactivating the heater.
Ensuring the cooling process completes before power disconnection.
Accessing and using the setting mode for configuration.
Mounting flue gas outlet, connecting, and checking gas types.
Using a flue gas analyzer for fine-tuning adjustments.
Displaying and changing the heater's capacity setting.
Adjusting the high-fire rate and CO2 levels.
Table detailing gas types and their heating/Wobbe indices.
Adjusting burner pressure, lambda, and O2 values.
Displaying and interpreting the flame signal.
Safety guidelines to avoid damage during cleaning.
Safe usage of high-pressure cleaners on the heater.
Steps for reassembling the fan and safety grille after cleaning.
Handling and rinsing when using chemical cleaning agents.
Critical safety advice for working on faulty equipment.
Procedure for inspecting internal wiring to resolve faults.
Diagram showing internal wiring and component connections.
Causes and remedies for flame fault (F).
Causes and remedies for air fault (A).
Causes and remedies for temperature fault (C).
Causes and remedies for electronics fault (E).
Troubleshooting error codes F.2 and F.3.
Troubleshooting error codes R.4 and R.5.
Troubleshooting error codes R.8 and R.9.
Troubleshooting error codes 5.1 and &2.
Troubleshooting error codes 6.3 and 5.4.
Troubleshooting error codes 5.9 and E.1.
Troubleshooting error codes E.2 through E.5.
Safety guidelines to prevent damage during maintenance.
Procedure for visually inspecting the heater's components.
Checking and interpreting the heater's operating cycles.
Procedures to verify safety functions and prevent explosions.
Steps to check burner settings and operation.
Information on compatible room thermostats and PC software.
Details of connection kits for natural gas and propane.
CE approval requirements for the coaxial chimney system.
Description of chimney elements and installation guidelines.
Example of chimney installation using a standard kit.
Example of chimney routed along an exterior wall.
Instructions on how to order necessary spare parts.
List of common spare parts with order numbers.
Technical data related to different gas types.
Overall device specifications including efficiency, materials, and dimensions.
Operating limits for ambient temperature and condensation.
List of relevant standards and directives for the product.
Guidelines for transport, storage, packaging, and disposal.
Form for returning the product for service or credit.
Contact information for Ademco 2 GmbH.
General
