To Next PageTo Next Page
Need help?Do you have a question about the Erreka RINO and is the answer not in the manual?
Explains symbols used to highlight specific texts and their meanings.
Emphasizes reading the entire guide before installation to prevent accidents and ensure correct operation.
Defines the intended application of the device for automatic sliding doors and gates.
Outlines the necessary professional skills and knowledge required for installation.
Addresses compliance with safety regulations and the importance of using specific components.
Illustrates and lists all components that form part of the complete gate automation system.
Details technical specifications, models, and key characteristics of the RINO operator.
Explains the different operational modes of the gate operator, such as automatic and step-by-step.
Describes how the system detects obstacles during gate operation using photocells or built-in sensors.
Provides instructions on how to unlock and manually operate the gate in case of power failure or emergencies.
States the operator's compliance with relevant European directives and safety standards.
Instructions for safely opening the package and handling the contents.
Lists and identifies all the items included in the product package.
Lists the necessary tools and materials required for the installation process.
Details pre-installation checks for the gate, environment, and power supply.
Step-by-step guide for physically mounting the operator unit onto the gate base plate.
Explains how to connect the operator to the power supply and other electrical components.
Details the wiring for safety photocells (closing and opening) with testing configurations.
Instructions for connecting the power supply and verifying the operator's rotation direction.
Identifies and explains the function of various control switches and buttons on the control panel.
How to program radio codes for the RSD-SH1 receiver, covering total and pedestrian opening.
Procedure for programming the full open and close limits, including slowdown points.
Procedure for programming specific open and close limits for pedestrian access.
Explains how to select operating modes and configure control panel functions using DIP switches.
Guide to adjusting potentiometers for garage light time, standby time, and torque control.
Final checks and user instructions after installation and programming are complete.
Detailed explanation of the functions controlled by the SW2 DIP switches for programming and operation.
General guidelines for performing regular maintenance on the operator.
Recommendations for using only original spare parts when repairing the device.
Identifies common problems, their causes, and solutions, often indicated by LED status.
Instructions for the environmentally responsible disposal and recycling of the operator at the end of its life.
General| Manufacturer | Erreka |
|---|---|
| Model | RINO |
| Type | Garage Door Opener |
| Maximum Door Weight | 100 kg |
| Maximum Door Height | 2.5 m |
| Wall Control | Yes |
| Warranty | 2 years |
| Motor Type | DC |
| Power Supply | 230V AC |
| Safety Features | Obstacle detection |
| Remote Control | Yes |
