To Next PageTo Next Page
Need help?Do you have a question about the ESAB Aristotig 405 AC/DC and is the answer not in the manual?
General| Brand | ESAB |
|---|---|
| Model | Aristotig 405 AC/DC |
| Category | Welding System |
| Language | English |
Describes the DTG 405 as an inverter technology welding rectifier for TIG and electrode welding.
Lists the items included with the DTG 405 welding power source.
Provides detailed technical specifications and parameters for the DTG 405 welding power source.
States that installation must be performed by a specialist and provides a warning about industrial use.
Explains how to locate the welding power source and connect it correctly, including cable recommendations.
Refers to general safety instructions for operating the welding device found on page 76.
Details the control installations and connections of the welding device, with a labeled diagram of ports.
Explains how the welding current can be adjusted using a remote regulator for TIG and electrode welding.
Explains the integrated thermal cut-out that protects the equipment from overheating and the procedure when error '4' occurs.
Overview of the welding device's control panel, including its various switches, buttons, and displays.
Details the settings and procedures for performing electrode (MMA) welding with the device.
Explains the settings and procedures for performing TIG welding, including spot, four-stroke, and two-stroke modes.
Provides a step-by-step guide to configuring the control panel for various TIG welding operations.
Explains how to set the welding current type for DC and AC welding operations.
Describes the forced interruption function, its purpose, and what it prevents.
States that warranty is void if the customer attempts to rectify faults during the warranty period.
Provides instructions for cleaning the welding power supply and recommends annual servicing by an official dealer.
