Need help?Do you have a question about the ESAB EPR-X1 and is the answer not in the manual?
General| Brand | ESAB |
|---|---|
| Model | EPR-X1 |
| Category | Respiratory Product |
| Language | English |
Explains the meaning of various warning symbols used in the manual.
Provides essential safety advice regarding arc rays, protective clothing, and eye protection.
Advises on hearing protection against excessive noise.
Details risks from fumes/gases, emphasizing ventilation and avoiding specific materials.
Outlines precautions against fires and explosions from heat, sparks, and hot metal.
Informs about the proper disposal of electronic equipment at recycling facilities.
Approval is valid only with approved parts and filters.
Check component completeness and condition before assembly.
Manufacturer is not liable for personal injury due to incorrect usage.
If filter is wet/loaded/damaged, replace; do not clean filter media.
Ensure the belt is securely fastened while wearing.
Check tube is securely connected; replace if broken.
All components must be installed per manual for specified protection.
Test airflow before use to ensure proper function.
Airflow must be tested before use; do not use if minimum level is not met.
Adjusts the headgear and face seal for proper fit and sealing.
Ensure face seal is properly positioned for correct protection factor.
Identifies the buttons and indicators on the device's control panel.
Details how to switch the device on, off, and adjust airflow levels.
System operates in -5°C to +55°C and <90% RH.
Lists all components of the EPR-X1 PAPR system with part numbers.
Instructions for daily inspection, checks for damage, and component replacement.
Guidelines for storing the respiratory system in a dry, clean environment.
Explains sound and vibration alarm functions and patterns.
To Next Page
