ESAB LAF Series User Manual

-6-
SafeArcW GB
Class A equipment is not intended for use in residential locations where
the electrical power is provided by the public low-voltage supply system.
There may be potential difficulties in ensuring electromagnic
compatibility of class A equipment in those locations, due to conducted
as well as radiated disturbances.
CAUTION!
WARNING!
Read and understand the instruction
manual befor e installing or operating.
Do not dispose of electrical equipment together with normal waste!
In observance of European Directive 2002/96/EC on Waste Electrical and Electronic
Equipment and its implementation in accordance with national law, electrical equipment
that has reached the end of its life must be collected separately and returned to an
environmentally compatible recycling facility. As the owner of the equipment, you should
get information on approved collection systems from our local representative.
By applying this European Directive you will improve the environment and human health!
CAUTION!
The welding power source and control box PEH can't be used together.
GB

ESAB LAF Series Specifications

General

Duty Cycle	100% at rated current (depending on model)
Input Frequency	50/60 Hz
Current Range	30-500 A
Input Voltage	380-415V/440-460V
Output Current Range	30-500 A
Efficiency	85%
Cooling	Water-cooled (depending on model)
Power Factor	0.93