Need help?Do you have a question about the ESAB LHN 140 and is the answer not in the manual?
General| Brand | ESAB |
|---|---|
| Model | LHN 140 |
| Category | Welding System |
| Language | English |
States compliance with EN 60974-1 and EN 50199 standards.
Covers electric shock, fumes, arc rays, fire hazard, and noise risks during operation.
Advises against using the power source for thawing frozen pipes.
Details performance, voltage, current, fuse, enclosure, and application class for Caddy 140/200.
Covers industrial use, potential radio interference, and specific voltage requirements for Caddy 140/200.
Details the power switch, yellow/white lamps, current control knob, and remote socket.
Details welding with DC current for various steels and electrode sizes (Ø 1.6-3.25mm for 140, Ø 4.0mm for 200).
Explains TIG welding suitability, touch start method, and required equipment like torch and gas.
Lists ordering numbers for Caddy 140, Caddy 200 welding power sources, and the spare parts list.
Details essential spare parts like the filter and grill with their respective ordering numbers.
Lists remote control units (MMA 1, AT1, AT1 CF) and remote cables in various lengths.
To Next Page
