Need help?Do you have a question about the ESAB MultiMaster 160 and is the answer not in the manual?
General| Input Current | 16 A |
|---|---|
| Welding Current Range | 5 - 160 A |
| Weight | 13 kg |
| Output Current Range | 5-160 A |
| Current Range (MMA/TIG) | 5-160 A |
| Rated Input Current | 16 A |
| Input Voltage | 230 V |
| Duty Cycle | 20% @ 160A |
| Protection Class | IP23 |
| Welding Process | MMA/TIG |
| Rated Output (MMA) | 160 A |
| Rated Output (TIG) | 160 A |
| Rated Output (MIG/MAG) | 160 A |
| Power Supply | 230 V |
Personal safety measures for welding operations, including eye, skin, and hearing protection.
Precautions to prevent fires and explosions related to welding operations.
Hazards and safety measures related to electrical shock during welding.
Information on EMF hazards and procedures to minimize exposure.
Hazards and safety precautions related to welding fumes and gases.
Safe practices for handling compressed gas cylinders.
Safety precautions for maintaining welding equipment.
References to further safety publications and standards.
Overview of the manual and general instructions for operators.
Procedures for inspecting and handling the equipment upon receipt.
Importance of reading safety precautions before installation and operation.
Overview of the Multimaster 160's capabilities and intended uses.
List of standard accessories included with the Multimaster 160 package.
Details about the Multimaster 160's power source and its operation.
Information on the integrated wire feeder system.
Overview of the controls for operating the Multimaster 160.
Details about the included MXL 200 MIG gun.
Factors to consider for proper placement and ventilation of the unit.
How to connect the power supply to the welding unit.
Connecting welding leads and torches to the output terminals.
Installation and setup of the wire feeder components.
How to connect and set up the shielding gas supply.
Description of the main controls on the welding machine.
Step-by-step guide for setting up MIG welding.
Step-by-step guide for setting up TIG welding.
Step-by-step guide for setting up Stick welding.
General guidance on maintaining and servicing the welding equipment.
Procedures for inspecting and servicing key components of the unit.
Details on maintaining power source internal components like rectifiers and transformers.
Specific maintenance instructions for the wire feeder system.
Guidance on ordering replacement parts, including required information.
How and where to order replacement parts from ESAB.
Contact information for general inquiries, order entry, and product availability.
Contact for warranty returns and authorized repair stations.
Contact for part numbers and technical applications.
Contact information for requesting manuals and documentation.
Contact for equipment repairs, estimates, and status.
Contact for training school information and registrations.
Contact for assistance with welding processes.
Contact for technical assistance regarding consumables.
Information for general inquiries, web visits, and downloads.
To Next Page
