Need help?Do you have a question about the ESAB Buddy Tig 160 and is the answer not in the manual?
General| Input Voltage | 230 V |
|---|---|
| Mains Voltage | 230 V |
| Supply Frequency | 50/60 Hz |
| Input Frequency | 50/60 Hz |
| Rated Input Current | 16 A |
| Output Current Range (MMA) | 10 - 160 A |
| Welding Current Range MMA | 10 - 160 A |
| Duty Cycle (TIG) | 25% at 160 A |
| Power Factor at Max Current | 0.73 |
| Weight | 7 kg |
| Rated Output MMA | 160A |
| Rated Output TIG | 160A |
| Operating Temperature | -10°C to +40°C |
| Phase | 1-Phase |
| Enclosure Class | IP23 |
| Protection Class | IP23 |
Details required personal safety equipment for operation.
Outlines general safety measures and warnings for equipment use.
Covers electrical shock, fumes, arc rays, fire, noise, and malfunction risks.
Instructions for proper disposal of electronic equipment at a recycling facility.
Lists the items included with the welding power source.
Guidance on positioning the power source for optimal cooling.
Details on connecting to mains power, including fuse sizes and cable areas.
Details on connecting welding cables, torches, and gas.
Explains control panel symbols, indicator lamps, and overheating protection.
Comprehensive guide to TIG welding, including procedures and requirements.
Detailed instructions for MMA welding, including striking, electrode handling, and parameters.
Guidance on setting welding current and arc force for optimal welding.
Instructions for checking and cleaning the welding power source.
Guidance on cleaning and replacing wear parts on the welding torch.
Recommended checks and inspections for common welding faults.
Information on using authorized service technicians and original spare parts.
Lists ordering numbers for the welding power source and spare parts list.
To Next Page