Need help?Do you have a question about the ESAB TIG 400i and is the answer not in the manual?
General| Input Frequency | 50/60 Hz |
|---|---|
| Output Current Range (TIG) | 5 - 400 A |
| Output Current Range (MMA) | 10 - 400 A |
| Rated Output Current | 400 A |
| Duty Cycle | 60% |
| Efficiency | 85% |
| Power Factor | 0.93 |
| Protection Class | IP23 |
| Input Voltage | 400 V |
| Cooling Type | Air |
Users must observe safety precautions, follow recommendations and general rules for safe operation.
Details hazards like electric shock, fumes, arc rays, fire, and noise with necessary precautions.
Details technical specifications of the TIG 400i welding power source.
Provides instructions for input wiring, grounding, and air inlet connections.
Explains manual arc and argon arc welding connection procedures.
Covers switch box requirements, voltage tolerance, and general installation guidelines.
Provides guidance on selecting an installation location and ensuring adequate ventilation.
Overview of the front panel, adjustment keys, and welding parameter ranges.
Explains the operation and diagrams for 2-step and 4-step welding modes.
Details the operation and diagram for the repeat welding mode.
Presents the detailed schematic diagram of the TIG 400i welding machine.
Instructions for fan maintenance and cleaning dust from the welding machine.
Explains the temperature monitoring and overload protection features of the machine.
Lists components with part numbers from 1 to 19.
Lists components with part numbers from 20 to 34.
Illustrates the exploded view of the welding machine components.
Provides contact details, address, phone, fax, and email for ESAB India.
To Next Page