Need help?Do you have a question about the ESAB Origo Tig 4300i AC/DC and is the answer not in the manual?
General| Frequency | 50/60 Hz |
|---|---|
| Number of Phases | 3 |
| TIG Welding Current Range DC | 5 - 430 A |
| TIG Welding Current Range AC | 5 - 430 A |
| Output Current Range (MMA) | 20 - 430 A |
| Cooling Method | Forced air |
| Protection Class | IP23 |
| Input Voltage | 400 V |
| Duty Cycle (40°C) | 60% |
| Application | TIG, MMA |
Lists essential safety measures for operating welding equipment, including electrical safety and fire prevention.
Provides critical warnings about electric shock, fumes, arc rays, fire hazards, noise, and malfunctions.
Warns that the product is for industrial use and may cause radio interference in domestic environments.
Details requirements for connecting the mains power, including voltage, fuses, and protective earth connection.
Identifies and explains the purpose of various connection points and control elements on the welding unit.
Describes the procedure for powering the welding unit on and off, and notes data storage upon shutdown.
Explains fan operation and thermal overload trips that protect the power source from overheating.
To Next Page