Need help?Do you have a question about the ESAB Origo Mag C171 and is the answer not in the manual?
General| Type | MIG/MAG Welding System |
|---|---|
| Input Voltage | 230 V |
| Input Frequency | 50/60 Hz |
| Output Current Range | 30-170 A |
| Fuse (slow) | 16 A |
| Insulation Class | H |
| Protection Class | IP 23 |
| Wire Feed Speed Range | 1.5-16 m/min |
| Wire Diameter Range | 0.6-1.0 mm |
| Rated Output | 170 A / 22.5 V @ 20% |
Outlines directives, standards, and manufacturer declarations for the equipment.
Covers essential safety practices for operators and the work environment.
Highlights electric shock, fumes, arc rays, fire, and noise hazards and protective measures.
Introduces the Mig/Mag welding power sources and their capabilities.
Lists the items supplied with the welding power source.
Details technical data for Mig C141, C151, and Mag C171 models.
Details technical data for Mag C201 and C251 models.
Guides on positioning the unit and ensuring unobstructed air inlets/outlets.
Instructions for assembling components, including attaching wheels.
Step-by-step diagrams for assembling the Mig C141 model.
Step-by-step diagrams for assembling the Mig C151 model.
Step-by-step diagrams for assembling Mag C171, C201, and C251 models.
Details the correct electrical connection for the welding power source.
Advises on correct mains voltage and protection.
Provides guidance on fuse sizes and cable areas according to regulations.
Identifies and explains connection and control devices on the front panel.
Covers the procedure for welding without shielding gas.
Guides on setting and checking the wire feeder pressure for smooth feed.
Steps for safely replacing and inserting welding wire into the feeder.
Explains the overheating protection system and indicator lamps.
Details regular inspection and cleaning of the power source and welding gun.
Provides recommended wire feed settings for various wire types on the C141 model.
Provides recommended wire feed settings for various wire types on the C151 model.
Provides recommended wire feed settings for various wire types on the C171 model.
Provides recommended wire feed settings for various wire types on the C201 model.
Provides recommended wire feed settings for various wire types on the C251 model.
To Next Page
