Need help?Do you have a question about the ESAB Caddy Tig 2200i TA34 and is the answer not in the manual?
General| Current Range | 3 - 220 A |
|---|---|
| Protection Class | IP 23 |
| Power Factor | 0.99 |
| Frequency | 50/60 Hz |
| Setting Range DC | 3 - 220 A |
| Rated Input Current | 16 A |
| Output Current Range (TIG) | 3 - 220 A |
| Input Voltage | 230 V |
Details the operator's control panel and display board functions.
Describes the power supply board's role in filtering mains voltage and generating internal supplies.
Describes the functions of the TIG module, including HF generator and gas valve.
Explains the functions of the power board, including rectifier, charging, and PFC circuits.
Details the control board's role in monitoring and controlling welding operations.
Explains the various voltage supplies for the control board.
Describes the CAN bus communication system and its setup.
Details how faults are recorded, displayed, and summarized in the equipment.
Provides detailed explanations for specific fault codes related to the power source and welding data unit.
Instructions on preventing damage from electrostatic discharge to electronic components.
To Next Page