Need help?Do you have a question about the ESAB Caddy 150 and is the answer not in the manual?
General| Input Voltage | 230 V |
|---|---|
| Output Current Range | 5 - 150 A |
| Input Frequency | 50/60 Hz |
| Rated Input Current | 16 A |
| Protection Class | IP23 |
| Setting Range (MMA) | 5 - 150 A |
| Setting Range (TIG) | 5 - 150 A |
| Duty Cycle at 30% | 150 A |
Contains critical warnings for arc welding and cutting, including electric shock, fumes, arc, fire, and noise hazards.
Provides key specifications for Caddy 150 and Caddy Tig 150, including load capacity, voltage, and dimensions.
Describes the included equipment and features of the welding machines.
Details the intended uses and welding types for the Caddy machines.
Instructions on where to position the welding machine for optimal cooling and operation.
Guidance on connecting the power supply and welding cables, including polarity.
Steps for initiating welding operations, including checking connections and setting current.
Explains the thermal cut-out feature that prevents machine overheating during use.
Describes the machine's ability to compensate for voltage fluctuations.
Identifies and explains the function of various controls and connection points on the machine.
Procedures for cleaning the welding machine to ensure proper function and longevity.
Lists potential faults and provides step-by-step solutions for common welding machine problems.
Lists specific ordering numbers for LHQ150 and LTV150 models and their components.
To Next Page