Why is my ESAB Inverter welding performance poor?
Poor welding performance with your ESAB Inverter can occur if the welding current supply and return cables are not correctly connected, if the current value is not correctly set, if the wrong electrodes are being used, or if there is an issue with the gas flow. Check each of these elements to improve welding performance.
What to do if the ESAB Inverter welding current is interrupted?
If the welding current is interrupted during welding with your ESAB Inverter, check whether the thermal cut-outs have tripped and inspect the mains power supply fuses.
How to fix ESAB Inverter thermal cut-out tripping frequently?
If the thermal cut-out trips frequently on your ESAB Inverter, ensure that you are not exceeding the rated data for the welding power source. Avoid overloading the unit.
How to troubleshoot no arc on my ESAB Inverter?
If you're experiencing no arc with your ESAB Inverter, verify that the mains power supply switch is turned on, ensure the welding current supply and return cables are correctly connected, check that the correct current value is set, and inspect the mains power supply.
Overview of the manual and initial information about the power source.
Provides detailed specifications and performance parameters for the welding machine.
Illustrates the electrical connections and components of the welding machine.
Explains the function and identification of various components within the machine.
Details the functional aspects of the machine's circuit boards and components.
Provides guidance on performing service procedures and handling sensitive components.
General instructions for installation, safety, and operation of the welding equipment.
Covers connecting devices, understanding symbols, and powering on the welding source.
Guidelines for regular maintenance to ensure safe and reliable operation of the equipment.
Recommended checks and inspections to identify and resolve common faults in the welding equipment.
Information on how to access the spare parts list for the Tig 2200i AC/DC and related models.
A section for general notes or additional information not covered elsewhere in the manual.
Contact information for ESAB offices and distributors worldwide.
General| AC Frequency | 20 - 250 Hz |
|---|---|
| Dimensions | 418 x 188 x 345 mm |
| Weight | 15 kg |
| Protection Class | IP23 |
| Frequency | 50/60 Hz |
| Duty Cycle (TIG DC, 220A) | 25% |
| Duty Cycle (TIG AC, 220A) | 25% |
| Input Voltage | 230 V |
| Current Range (TIG AC/DC) | 220 A |
To Next Page
