Need help?Do you have a question about the ESAB Caddy Mig C160i and is the answer not in the manual?
Details the items included with the welding power source, such as the manual and gun.
Provides instructions on how to safely lift and move the welding power source.
Guidelines for positioning the welding power source to ensure proper airflow and accessibility.
Details mains voltage, cable area, fuse size, and generator supply requirements for safe connection.
Identifies and explains the function of all connection points and control knobs on the machine.
Describes the step-by-step process for starting and operating the welding power source.
Instructions on how to safely change the polarity setting for different welding wires.
Explains how to set the wire feeder pressure rollers for optimal wire feeding performance.
Step-by-step guide for loading and threading welding wire through the machine.
Information on the types of shielding gases compatible with the welding power source.
Details the unit's overheating protection system and indicator lamp.
Procedures for regular cleaning and inspection of the power source and welding gun.
Step-by-step guide on how to replace the wire liner in the welding gun.
Details the items included with the welding power source, such as the manual and gun.
Provides instructions on how to safely lift and move the welding power source.
Guidelines for positioning the welding power source to ensure proper airflow and accessibility.
Details mains voltage, cable area, fuse size, and generator supply requirements for safe connection.
Identifies and explains the function of all connection points and control knobs on the machine.
Describes the step-by-step process for starting and operating the welding power source.
Instructions on how to safely change the polarity setting for different welding wires.
Explains how to set the wire feeder pressure rollers for optimal wire feeding performance.
Step-by-step guide for loading and threading welding wire through the machine.
Information on the types of shielding gases compatible with the welding power source.
Details the unit's overheating protection system and indicator lamp.
Procedures for regular cleaning and inspection of the power source and welding gun.
Step-by-step guide on how to replace the wire liner in the welding gun.
General| Input Voltage | 230 V |
|---|---|
| Output Current Range | 30 - 160 A |
| Mains Voltage | 230 V |
| Fuse (slow) | 16 A |
| Enclosure Class | IP23 |
| Input Frequency | 50/60 Hz |
| Rated Input Current | 16 A |
| Wire Diameter | 0.6 - 1.0 mm |
To Next Page