Need help?Do you have a question about the ESAB Buddy Mig 500i and is the answer not in the manual?
General| Input Voltage | 3 x 400 V |
|---|---|
| Input Frequency | 50/60 Hz |
| Output Current Range | 30-500 A |
| Duty Cycle | 60% @ 500 A |
| Power Factor | 0.93 |
| Protection Class | IP 23 |
| Wire Diameter Range | 0.8-1.6 mm |
| Cooling Type | Forced air |
| Efficiency | 85% |
Recommended personal safety equipment and precautions for welding operations.
General safety measures for operation, maintenance, and workplace environment.
Identification and function of all controls and connection points on the power source.
Troubleshooting steps for addressing issues where no welding arc is produced.
Checks to perform if the welding current stops intermittently during operation.
Diagnosing reasons for the thermal cut-out activating frequently.
Troubleshooting common issues affecting the quality of the welding performance.
To Next Page